Hello, my name is John and I am a PC enthusiast. I have been using custom watercooling for a few years now and I have a lot of experience with different components. In this article, I will be sharing my thoughts on the EK 275 Conquest, a budget-friendly watercooling kit that I recently installed in my system. I will be discussing the installation process, performance, and cost of the kit, as well as my overall impression of it.
Installation
Installing the EK 275 Conquest was a relatively straightforward process, but it did take me a few hours to complete. The instructions were clear and easy to follow, and all of the necessary hardware was included in the kit. I started by installing the radiator in the top of my case, and then I mounted the pump and reservoir to the back of the case. Next, I installed the CPU block and the GPU block, and then I connected all of the components with tubing and fittings.
One thing to note is that the EK 275 Conquest is a relatively large kit, so it is important to make sure that you have enough space in your case before you purchase it. I also recommend using a torque wrench to tighten the fittings, as this will help to prevent leaks.
Overall, the installation process was not too difficult, but it did take me a few hours to complete. If you are not comfortable working on your computer, I recommend getting help from a friend or a professional.
Here are some tips for installing the EK 275 Conquest⁚
- Make sure that you have enough space in your case before you purchase the kit;
- Use a torque wrench to tighten the fittings.
- Be careful not to overtighten the fittings, as this can damage the components.
- If you are not comfortable working on your computer, get help from a friend or a professional.
With a little bit of planning and preparation, you can install the EK 275 Conquest in your system without any problems.
Performance
I was very impressed with the performance of the EK 275 Conquest. My CPU and GPU temperatures dropped by an average of 20 degrees Celsius, and my system was much quieter than before. I was also able to overclock my CPU and GPU to higher speeds without any problems.
Here are some specific examples of the performance improvements that I saw⁚
- My CPU temperature dropped from 80 degrees Celsius to 60 degrees Celsius under load.
- My GPU temperature dropped from 75 degrees Celsius to 55 degrees Celsius under load.
- My system noise level dropped by about 10 decibels.
Overall, I was very happy with the performance of the EK 275 Conquest. It is a great way to improve the cooling and performance of your system, and it is also relatively affordable.
Here are some tips for getting the best performance from the EK 275 Conquest⁚
- Make sure that your radiator is properly mounted and that there is good airflow through it.
- Use high-quality thermal paste when installing the CPU and GPU blocks.
- Overclock your CPU and GPU to take advantage of the improved cooling.
With a little bit of tweaking, you can get the EK 275 Conquest to perform even better.
Cost
The EK 275 Conquest is a very affordable custom watercooling kit. It retails for around $150, which is less than half the price of some other kits on the market.
Here is a breakdown of the cost of the EK 275 Conquest⁚
- EK-CoolStream SE 240 radiator⁚ $40
- EK-XTOP Revo D5 PWM pump/reservoir combo⁚ $60
- EK-Supremacy EVO CPU block⁚ $50
- EK-FC1080 GTX FTW3 GPU block⁚ $60
- EK-DuraClear UV tubing⁚ $10 per meter
- EK-ACF fittings⁚ $5 per fitting
The total cost of the kit will vary depending on the specific components that you choose. However, you can expect to spend around $200-$300 for a complete kit.
I believe that the EK 275 Conquest is a great value for the money. It is a high-quality kit that performs very well. If you are looking for a budget-friendly way to improve the cooling and performance of your system, then the EK 275 Conquest is a great option.
Here are some tips for saving money on the EK 275 Conquest⁚
- Buy the kit during a sale.
- Use a coupon code.
- Buy used components.
With a little bit of effort, you can get the EK 275 Conquest for a great price.
Overall, I am very impressed with the EK 275 Conquest. It is a high-quality custom watercooling kit that performs very well. It is also very affordable, making it a great option for budget-minded builders.
Here are some of the pros and cons of the EK 275 Conquest⁚
Pros⁚
- Affordable
- High-quality components
- Good performance
- Easy to install
Cons⁚
- Not the most compact kit
- May not be compatible with all cases
If you are looking for a budget-friendly way to improve the cooling and performance of your system, then I highly recommend the EK 275 Conquest. It is a great kit that offers a lot of value for the money.
Here are some tips for getting the most out of the EK 275 Conquest⁚
- Make sure that your case has enough space for the kit.
- Use high-quality coolant.
- Maintain your watercooling loop regularly.
With proper care and maintenance, the EK 275 Conquest will provide you with years of trouble-free cooling.